Page Index Toggle Pages: 1 Print
Normal Topic Borg-Warner T170FT Swap(RTS) (Read 616 times)
 
Hotdutch1951
Grease Monkey
Offline


Still Plays With Jeeps

Posts: 3
Location: DeKalb,Ill &  Shelbyvill,Tn
Joined: 06/26/18
Gender: Male
Borg-Warner T170FT Swap(RTS)
06/27/18 at 17:31:59
Print Post  
Looking to do a Transmission and transfer-case swap into the CJ3A my step-son and I are going to rebuild. The idea is to make it so he can drive it around town and to work and keep up with traffic. I'll be rebuilding the frozen engine and balancing and blue printing it like I use to do my Dragracing engines. The RTS transmission was fitted to '84-'85 Ford F-150's and Bronco. The shifter is mounted on the top plate and is a 3 speed with 4th being O/D. Being a Borg-Warner the transmission should bolt up to the stock bellhousing. Has anyone here done this swap?
I used the 2wd version in my Flathead powered Street Rod and it fit sweat.
Thanks for any help you can pass my way.
Smiley
  

1951 CJ3A with Stock Flathead engine
Frame off rebuild coming up .
Needs to be able to drive
everyday to work for my
Stepson
Back to top
IP Logged
 
mtnman37879
Flatfender Enthusiast
***
Offline


Plays With Jeeps

Posts: 164
Location: East Tennessee
Joined: 03/20/17
Gender: Male
Re: Borg-Warner T170FT Swap(RTS)
Reply #1 - 06/28/18 at 13:03:27
Print Post  
Why not just put an Overdrive on the stock transfer case. It's a fast and easy job.
  

People think I go out of my way to piss them off.
Trust me, It's not out of my way at all.
Back to top
IP Logged
 
Lee
Flatfender Enthusiast
***
Offline


Will-is enthousiast

Posts: 123
Location: People’s Republic of Minnesota
Joined: 12/14/13
Gender: Male
Re: Borg-Warner T170FT Swap(RTS)
Reply #2 - 12/31/18 at 22:36:53
Print Post  
I would agree with the other post, A Warn or Saturn OD installs in a few hours, allows you to split gears on & off road, or use OD in any gear. Not sure the RTS would bolt up in front, and defiantly wouldn’t in back (Herm the OD guy offers this with adapters). Also you may need to move the engine ahead or TC back to compensate for the different length of the trans ?, or alter driveshaft lengths. May be a PIA. I also think the split between 2nd & 3rd would be disappointing (1.92-1 vs 1.55 of a T90a1). Guys running a T90C complain about this with a 1.85-1 second gear, the RTS would be worse!...

Lee Wink
  

American Engineered Rolling History
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Print
Bookmarks: Facebook Google Google+ Linked in Twitter Yahoo