Page Index Toggle Pages: 1 Print
Normal Topic Drag Link (Read 51 times)
 
RandyA
3A Lover
**
Offline


Still Plays With Jeeps

Posts: 79
Location: big  bear lake,ca
Joined: 03/09/11
Gender: Male
Drag Link
06/11/18 at 10:46:43
Print Post  
Gents... Me again... When adjusting the drag link... Manual says run down end screw until you feel resistance, then back off half a turn... Should the springs have any compression in this? Or just until you feel the resistance at first... Thanks all... You guys make this a lot easier.. Randy A.
  
Back to top
 
IP Logged
 
aboyandhisdog
Flatfender Master
Owner Member 2012
2016 Sponsor Member
2015 Sponsor Member
*****
Offline



Posts: 616
Location: Fort Collins, Colorado
Joined: 12/14/10
Re: Drag Link
Reply #1 - 06/11/18 at 11:12:27
Print Post  
I do it as you have described and not had any issues.  Also, you might back the cap out before you add grease and then make your adjustment.  Lets a little more grease get in there.
  

Tom

Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Print
Bookmarks: Facebook Google Google+ Linked in Twitter Yahoo